• squaresinger@lemmy.world
    link
    fedilink
    arrow-up
    1
    ·
    14 hours ago

    Then take this one: https://m.made-in-china.com/product/USB-to-Ethernet-8-Ports-Switch-2079770325.html

    But even if you can’t find an off-the-shelf solution for this, it’s trivial to DIY one. One USB controller can feed 127 devices maximum. You’ll obviously need powered USB hubs for that, but that’s not an issue. This works because when you enable USB tethering, the phone can be in USB device mode while getting IP over USB. The main issue here is the routes, but if you use an app that creates a local VPN on the phone to capture the traffic you can then tunnel that traffic through the tethering connection, using it in the reverse direction. Now you only need a PC with many USB controllers (easily done using PCI-E extension cards) and you are done.

    Setup is a little complicated, but you only need to configure it once and then copy it over to all the phones.

    I would love to see something like that, but with active cooling and 180-240W PD. And probably dual L6-30s, if not more, to power the damn thing.

    I haven’t seen any devices so far that can deliver high wattage on multiple ports at the same time, so I think the PD is probably the bigger limit.