Hello there,

after a few years of being out of the hobby I am starting to get interested again after seeing that a lot of budget printers now are having all the features that my old one were missing. Direct extruder, auto bed leveling, dual z axis, stuff like that. So which one of the budget printers around 300€ would you guys suggest one should get to get started again? Elegoo Neptune 4? Creality Ender 3 V3? Anycubic Kobra 2? Sovol S06? There are so many good looking options that I am interested in your experiences and opinions. Thanks!

  • Shdwdrgn@mander.xyzEnglish
    3·
    8 months ago

    I’ve always wondered where this comes from, the thought that a person would spend a huge amount to upgrade an Ender? I spent maybe $100 upgrading mine until I screwed up and fried my motherboard, but even adding the extra $60 for a decent upgrade I’ve still spent less than the original cost of the printer, and way WAY less than the cost of a Prusa. At this point the main upgrades include a direct drive and dual-Z to handle some NinjaFlex. I’ve always considered ABL a waste of money, and every other upgrade was just things I printed myself. You certainly can’t beat the reliability, I mean my printer has been sitting idle for nearly a year and I just fired it up a couple weeks ago to print some new items – no leveling or anything else, I just loaded up a spool of PLA and off it went. So what exactly are people spending these exorbitant amounts of money on for upgrades?

    • _haha_oh_wow_@sh.itjust.worksEnglish
      4·
      8 months ago

      Partly, time is money but partly IDK, I’ve spent at least $200 upgrading mine with scaffold reinforcements, BL touch, a better hot end, and a few other QOL things and I’ve spent more on the CR10 than I did on the MK3S+ but it still doesn’t work as well as the Prusa. Granted, the print volume is bigger but I hardly ever print anything big enough to take advantage of it.

      • Shdwdrgn@mander.xyzEnglish
        2·
        8 months ago

        Agreed that time is money, and I’ve spent a fair amount of time on mine. I think the worst time-sink was after converting to direct drive and basically having to start from scratch on all my slicer settings, and then working out cable management to reclaim my Z height. At one point I was playing with faster speeds (thus the dual-Z upgrade) but eventually I want to switch to a 0.2mm nozzle and try to dial in miniatures (HO scale trains). I would be better off switching to a resin printer for that but I don’t have an option for good ventilation so that’s not really a consideration right now.