• Matt Blaze@federate.socialOP
    link
    fedilink
    arrow-up
    1
    ·
    7 days ago

    Mediumwave (AM) broadcast radio uses lower frequencies than other modern broadcasting and so requires much larger antennas (generally getting larger and larger as the frequency gets lower on the dial). This often entails highly customized antenna designs engineered for the particular site and station frequencies. For most radio stations (FM, TV, etc), the towers are there simply to get the relatively small antennas up high, but for AM stations like KNBR, the towers generally ARE the antennas.

    • MikeWas@esq.social
      link
      fedilink
      arrow-up
      1
      ·
      7 days ago

      @[email protected] I was surprised that they operate in the 441m wavelength space, meaning the antenna does have to be huge. For some reason I thought commercial AM operated in a shorter band.

    • Matt Blaze@federate.socialOP
      link
      fedilink
      arrow-up
      1
      ·
      7 days ago

      The taller tower (550 feet) at right is the main KNBR antenna, built in 1949. It employs an unusual “pseudo-Franklin” design; it’s actually an array of two antennas stacked atop one another. The 400 foot lower section is insulated from the ground. The upper 150 foot section is insulated from the lower section. The large (50 foot) diameter “capacitance hat” at the top (reminiscent of the Parachute Jump at Coney Island) electrically lengthens the top section, saving 250 feet of additional height.

      • Giles of the Jungle@twit.social
        link
        fedilink
        arrow-up
        1
        ·
        7 days ago

        @[email protected] I’m fascinated by the cap hat, specifically why we don’t see more of them. I’d have thought saving tower height would always be welcome. I guess it’s a tradeoff and the hats only make sense, given some limitation or other, at particularly large wavelengths?

        • Matt Blaze@federate.socialOP
          link
          fedilink
          arrow-up
          1
          ·
          7 days ago

          @[email protected] The hats aren’t as efficient as a proper length antenna; they serve mostly to increase the current flowing at the top end. And they’re BIG (this antenna is so tall that you can’t easily tell that the top hat is almost 50 feet across!)

      • Matt Blaze@federate.socialOP
        link
        fedilink
        arrow-up
        1
        ·
        7 days ago

        This distinctive stacked dual antenna arrangement is used to lower the radiation angle of the antenna, concentrating transmitted power to the “ground wave” and reducing energy that would otherwise be sent upward into the sky.

        The smaller (300 foot) freestanding mast in the background left is not in current use. It can be used as an emergency spare antenna for KNBR during maintenance of the taller main antenna.