I’ve lost everything and I don’t know how to get it back. How can I repair my system all I have is a usb with slax linux. I am freaking out because I had a lot of projects on their that I hadn’t pushed to github as well as my configs and rice. Is there any way to repair my system? Can I get a shell from systemd?

      • pastermil@sh.itjust.works
        2·
        1 year ago

        You may need to adapt the last part to your needs.

        Example:

        • for Fedora, you’d use dnf instead of pacman
        • if your bootloader is broken, you’d want to run grub-install or grub-mkconfig
        • if your initramfs doesn’t recognize your new partition, you’d want to regenerate it with the current fstab or crypttab
  • Moobythegoldensock@lemm.ee
    22·
    1 year ago

    Boot to a liveUSB of the distro of your choice, create a chroot to your install, and then run a Pacman update from there.

    Googling “Arch rescue chroot” should point you in the right direction. Good luck!

    • 257m@lemmy.mlOP
      4·
      1 year ago

      Will this work from slax linux? I am sorry if I seem like I can’t fix the issue myself seeing as you have given the resources for me to do so but what would be the exact steps to do that?

      • Moobythegoldensock@lemm.ee
        6·
        1 year ago

        I’ve never used Slax but it should, boot the liveUSB and enter terminal.

        The general process is:

        • Boot to live Slax
        • Mount your install
        • Mount /proc, /sys, /dev
        • Enter the chroot
        • Check if networking is working
        • Attempt to run commands in your chroot
        • Exit the chroot
        • Unmount everything
        • Boot back to your install

        https://wiki.archlinux.org/title/Chroot

      • angrymouse@lemmy.world
        4·
        1 year ago

        It should work, afaik chroot always use the binaries of the system you chrooted, so you will be able to use pacman normally. I don´t remember if chroot will mount the efi partition by default, you can do this before go to chroot (again, I’m have some memory issues but I believe that /dev does not mount as well if you just use chroot, this is why arch have arch-chroot that mounts this kind of stuff but you can mount before so it should work).

        Assuming you are using systemd boot on efi partition (that is likelly if you have not changed the installer defaults), what I would do:

        • On your live CD run sudo fdisk -l to get what is the efi partition, usually will be /dev/sdb1 since sda will be your usb, you should be able to see something like that.

        • Then you will mount your endevour partition, in your situation should be sudo mount /dev/sdb2 /mnt/mydisk but check your fdisk command output.

        • Now you will have to mount the efi partition sudo mount /dev/sdb1 /mnt/mydisk/efi

        • Then you can use chroot /mnt/mydisk/ and proceed to do a pacman -Syu, this should trigger the post scripts that create the kernel images on the efi partition.

    • angrymouse@lemmy.world
      1·
      1 year ago

      This one, I did it recently when my girlfriend uninstalled python that was necessary to run the process of creation the image of your kernel in the efi partition and happened the same thing, the update process removed the old images from efi partition but was not able to copy the new.

    • darcy@sh.itjust.works
      1·
      1 year ago

      for a simple solution: git + gnu stow. life changing.

      something like:

      ~/dotfiles:

      i3/
    .config/
        i3/
            config
kitty/
    .config/
        ...

      stow */

      symlinks everything nicely :)

      • Melmi@lemmy.blahaj.zoneEnglish
        7·
        1 year ago

        I don’t know about you, but I tend to make lots of little changes to my setup all the time. Versioning makes it easy to roll back those individual changes, and to tell which change broke what. Sure, you could accomplish the same thing with backups, but versioning offers additional information with negligible cost.

        Why not stick them in a git repo?

        • Helix 🧬@feddit.de
          1·
          1 year ago

          Why not stick them in a git repo?

          Because the benefit gets lost if there are lots of autogenerated config files. Someone else said ‘stick only the files you write yourself in the repo’ and I guess that’s a better idea than to stick all of them in a repo.

      • Solar Bear@slrpnk.netEnglish
        6·
        1 year ago

        Versioning is one of those things that you don’t realize you need until it’s too late. Also, commits have messages that can be used to explain why something was done, which can be useful to store info without infodumping comments into your files.

        • Helix 🧬@feddit.de
          1·
          1 year ago

          Why versioning and not backups? I get the part of commit messages, but that’s hardly worth the effort for me. If I have a config file which works, I usually keep it that way. And if it stops working, my old documentation is outdated anyway.

          • FooBarrington@lemmy.world
            2·
            1 year ago

            Why do we use versioning for code instead of backups? Simple, versioning is better than backups for almost all text files, since it’s a granular backup with change messages etc.

            You can ask the same question about code.

          • flux@lemmy.ml
            1·
            1 year ago

            I use etckeeper to autocommit changes in /etc as git just has better and faster tools to look at the changes of a fle, compared to backup tools.

            It’s just so easy to do that there hardly is any point in not doing it.

      • vector_zero@lemmy.world
        31·
        1 year ago

        In my experience, it’s shockingly useful. For example, maybe I want to try out a new set of Emacs packages. I can make a branch, mess around for a bit, and even keep that configuration for a week or two. Then if I find out it’s not good, I can switch back

      • jabberati@social.anoxinon.de
        2·
        1 year ago

        I also rarely want old versions of my code, but I still use git. A very nice feature, besides the essential backup quality, is to synchronize dotfiles between machines and merge configs together if they diverge.

        • Helix 🧬@feddit.de
          1·
          1 year ago

          I sync them with Syncthing and can also access backups of the old files. I can also merge them with merge tools and create tagged versions with git. Most of the time I don’t and I can’t think of any instance where I used git to compare an old version with a newer config file. I get why we should version code, but config files for most desktop programs are hardly worth tracking because of the frequent intransparent changes.

          • jabberati@social.anoxinon.de
            1·
            1 year ago

            I only track the dotfiles which I actually write, not the generated ones. So it’s not so different from code. Desktop programs which generate intransparent config files suck. I only wish there was a good way to synchronize my Firefox using git. I know there is user.js but it all seems like a mess to me.

  • bbbhltz@beehaw.org
    8·
    1 year ago

    Been here before, but didn’t bother asking for help. Just used a liveusb to grab what I needed and reinstalled. I need to learn how to chroot …

    • loops@beehaw.orgEnglish
      1·
      1 year ago

      Same, though I did try to chroot. Totally failed though. Luckily I had backups, which I learned never backed up properly.

      The lessons I learned were to never trust a GUI and always make sure your backups are viable. I still have a copy of a duplicity backup form ~2020 that I hope one day to recover, if anythings in it.

  • QuazarOmega@lemy.lol
    7·
    1 year ago

    To add to the other responses, after you recovered your stuff you could probably like moving to an immutable OS if you risk having power issues often, the transactions won’t be applied until everything is done so if anything happens during a transaction you’ll just remain at your last usable state

    • Guenther_Amanita@feddit.de
      6·
      1 year ago

      I had the same thought, but didn’t want to sound insensitive.

      Saying “Your fault, using Arch for something important is a bad idea, you should have made a backup before”, while he fears all his important data is gone, would have been rude and very unhelpful.

      But immutable distros solve these issues, yes. Since I switched to Silverblue I’ve never been more relaxed than ever. If something goes bad, I just select the old state and everything works, and updates never get applied incompletely like here.

      • QuazarOmega@lemy.lol
        3·
        1 year ago

        I’m sorry if I sounded insensitive, it wasn’t my intention, just thought that since many others had already given a solution to the data and even OS recovery I could chip in to add something that they might find useful, if they don’t mind switching away from Arch.
        I hope mine would be a reassuring suggestion more than anything

        • Guenther_Amanita@feddit.de
          2·
          1 year ago

          You didn’t! :) You couldn’t have said it better, especially in your answer here!

          As I said, I had the same thought as you with immutable distros like SB or Nix.

          I just didn’t have much to add as an additional comment besides “Kids, this why you should always backup and maybe use an immutable distro if you can”.

          As someone who values robustness and comfort, I wouldn’t touch something arch-based even with a broom-pole.

          If I wanted something that’s a rolling release, I would use Tumbleweed or it’s immutable variant.

          For me at least, the only pro in Arch is that you can configure everything exactly to your imagination, if I know exactly what I’m doing. And EndeavorOS is pretty much a pre-configured Arch that removes the only USP of it, the DIY-element.

          I don’t see myself as competent enough to maintain my arch install, but I can access the AUR with distrobox on every other distro, like Silverblue, too, so I don’t care. The big software repository isn’t an argument for me in 2023 anymore. With distrobox my arch stuff is isolated and if something breaks, I can just forget my two installed apps and reinstall this container in 2 minutes.

          It’s just an unimaginable peace of mind for me to know that if I shut down my PC today it will work perfectly tomorrow too. I’m just sick of reinstalling or fixing shit for hours every weekend. I’m too tired for that and have other responsibilities.

          But yeah. My thoughts were exactly the same as yours and I didn’t have much more to add besides saying “Hey, do xy that this won’t happen anymore in the future” without sounding like Captain Hindsight from South Park. Context

          • QuazarOmega@lemy.lol
            1·
            1 year ago

            You took the words right out of my mouth.

            Btw that clip was hilarious, I hope I don’t come off like that often lol

    • 257m@lemmy.world
      3·
      1 year ago

      It wasn’t a power issue it was me forgeting that I ran yay in the background.

    • Atemu@lemmy.ml
      1·
      1 year ago

      Note that this isn’t about immutability but atomicity. Current immutable usually have that feature aswell but you don’t need immutability to achieve it.

      • QuazarOmega@lemy.lol
        1·
        1 year ago

        Yeah you’re right, however searching “linux distro with atomic updates” doesn’t seem to turn up much, as you say, in most cases the two features happen to come together and the distros that have them are mostly known for the former

  • hperrin@lemmy.world
    6·
    1 year ago

    If nothing else, your files are all fine. You can mount your drive on a different system (like a live USB) and copy all your files.

  • moreeni@lemm.ee
    4·
    1 year ago

    There is nothing worth of freaking out in your situation. Your files shouldn’t have been impacted at all.

    Boot from LiveUSB and reinstall the packages you were updating, maybe reinstall grub too.

    There are tons of guides for this in the Internet, like this one: https://www.jeremymorgan.com/tutorials/linux/how-to-reinstall-boot-loader-arch-linux/

    Edit: since you probably use systemd-boot, as I can see from your post, obviously the grub part of my comment shouldn’t be done. Replace those parts with systemd-boot reinstallation. Even better if pacman will update it, because there’s probably some hook already to do things manually and you won’t have to touch systemd-boot at all

  • Zloubida@lemmy.worldEnglish
    4·
    1 year ago

    Other people will probably give you better answers, but I think the solution is quite easy: chroot and relauch the update.

  • 257m@lemmy.mlOP
    4·
    1 year ago

    Thank you all for offering advice. I did eventually get it working and repaired all the packages.

  • PlusMinus@lemmy.world
    3·
    1 year ago

    Boot a live Linux, chroot into your system, run pacman again and fix your systemd boot to include a fallback option for the next time this happens.

  • breadsmasher@lemmy.worldEnglish
    41·
    1 year ago

    Assuming you have access to a secondary computer to make a LiveUSB

    • boot a live disk/USB on your PC and copy the data you want off. Then reinstall the OS.

    • If you haven’t got a drive you can move data to, from the live OS, partition your disk and move the data to the new partition CAUTION ON PARTITIONING

  • Resolved3874@lemdro.idEnglish
    1·
    1 year ago

    Can’t help but I just did this myself. Was a fairly fresh install so I didn’t lose anything other than have to reconfigure some stuff and install some things.

    Buuuuut

    What happened dto me was something crashed during the update and my computer went to a black screen. So I just left it for a bit to hopefully finish even without the display. Turned the computer off and my nvme was just gone. Ended up having to get a new one.

      • Resolved3874@lemdro.idEnglish
        1·
        1 year ago

        Nope. I think the drive just died at a bad time honestly. I’ve had issues with it in the passed and the computer itself came from an e-scrap pile because the water pump for the CPU cooler was dead. Has worked great since swapping that out until the nvme died. Even after installing the new nvme and reinstalling EOS I couldnt see the old nvme.