Not to defend US power plugs (the UK plug is clearly superior) but this sounds like a problem with your adapter. US plugs rely on the socket having enough friction to hold the plug. It’s obviously not the best design decision, but I’ve only had issues with cheap adapters and >50 year old sockets (which are hard to find because they tend to get replaced during remodeling).
also, yes it’s obviously an issue with the adapter in that it’s one of those wall-warts you can change the plug on, except they only shipped me a us plug >:(
Not to defend US power plugs (the UK plug is clearly superior) but this sounds like a problem with your adapter. US plugs rely on the socket having enough friction to hold the plug. It’s obviously not the best design decision, but I’ve only had issues with cheap adapters and >50 year old sockets (which are hard to find because they tend to get replaced during remodeling).
The sparks are also less of an issue with 110v.
schuko4lyfe
also, yes it’s obviously an issue with the adapter in that it’s one of those wall-warts you can change the plug on, except they only shipped me a us plug >:(
Get some size apropriate heatshrink and cut of the stupid US plug and take a UK or schuko plug (whichever you need) and solder that on.
unfortunately it’s super low profile. i’m trying to figure out what to do about it but for now i added an extension cord.
I mean just changing the last 10cm of the power cable should not change much. And iff the plug needs to be low profile you can go with the type c plug
it’s low profile in the other direction. It’s one of these doohickeys, except even flatter, and connected to a bigger wall wart than this:
The friction also helps clean off the contacts for better connection.