Image transcription:

Processor: (3.40 GHz) 4-Core Intel Core i7-6700 Processor

Memory (RAM): 32GB (2x16GB) DDR4 PC4 U Memory (for i-series/Core Processors)

Graphics Card: Integrated Graphics (with i series processors only) +$0.00

Drive 1: 3TB HDD SATA 7.2k 3.5" Hard Drive

Drive 2: 3TB HDD SATA 7.2k 3.5" Hard Drive

M.2 Storage: 512GB M.2 SSD NVMe Drive

Price: $291.95

My main concern with this option is energy usage. The CPU’s TDP is 65W, the CPU in my current server’s TDP is 35W.

It does have a few advantages over my current setup:

  • More RAM 8 → 32
  • Better CPU, passmark score 4766 → 8091, threads 4 → 8
  • Ability to use RAID, current setup only has the capacity for 1 drive.

Is this a good option or is there a better option? I’ve also been considering using an external drive enclosure with software RAID, but I heard that could be unreliable.

EDIT: Is the price good? Shipping is quite expensive (about $100), so I’m only planning on buying it if the deal is good.

  • MuchPineapples@lemmy.world
    link
    fedilink
    English
    arrow-up
    3
    ·
    edit-2
    1 year ago

    I didn’t see anyone else say this, but 7200 rpm disks are way louder than 5400. Where my server is it would be annoying, but if it’s in a closed room somewhere you’ll be fine.

    Also, these drives are probably not made to run 24/7/365. First 1 or 2 years or so it will probably be fine, but after you can expect some sudden dead drives.

    • Nollij@sopuli.xyz
      link
      fedilink
      English
      arrow-up
      5
      ·
      1 year ago

      The “designed for 24/7” thing is a myth. Yes, some server/enterprise parts have a lower failure rate, but it has nothing to do with 8 hours a day vs 24.

      Also, my setup is almost entirely the cheapest consumer drives available, and I’ve never had any significant failure rates outside of the one bad supplier. If you are seeing anything like that, you should examine your setup. I suspect you either have cooling issues or (more likely) vibration that’s causing premature failures.

    • SheeEttin@lemmy.world
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      I have never known RPM of a drive to affect its noise level. The fan(s) will be far more significant in noise level. Most drives run pretty quietly, though some can get noisy during I/O, like my HGST Ultrastar He6 drives.

      Also, without knowing the model, I wouldn’t say they’re not made to run 24/7. But even on desktop drives, it’s rarely run time that kills them, it’s start-stop cycles. Everything will be fine, but one day you’ll shut it down and some drives won’t spin up. That’s why power outages can be deadly to an old server.