I’m aware of things like framework and they’re a cool system, but they’re limited in what chipsets can be used by the mother boards they offer.

I’m thinking in the context of a cheap low spec system that can be handed out for use by a group. Most of the options available are just very pricy.

Maybe something like a SBC would be a better fit since there are plenty of cheap options out there and they can be mounted in a custom built shell with the other needed elements.

A thought that crossed my mind was ordering printed circuit board and just soldering on the sockets and the like, but that’s a very involved process with a lot that could go wrong. Especially for someone with very little experience.

Short of custom ordering from a company that does such things, are there any systems for building a mother board?

This is more out of curiosity about what options there are out there. Any other thoughts people have about custom built laptops or interesting things in that space?

  • BlameThePeacock@lemmy.caEnglish
    29·
    10 个月前

    The equipment required to “make” a motherboard is orders of magnitude more expensive than anything you could afford.

    There’s a reason why it’s all custom designed and there’s only a handful of board manufacturers in the entire world, most laptop companies don’t even have their own fabrication for these pieces, they just do the design and final assembly.

      • jarfil@beehaw.org
        6·
        10 个月前

        You can order a board from the likes of PCBWay… you can even ask them to populate it and solder the components for you… but just designing a board with the complexity of a laptop, will require a lot of expertise, a lot of work… and most likely require several iterations where you’ll end up with a bunch of trash boards with some flaw in them, and you’ll have to pay for it all.

        It’s still a tool you could use, but I’d recommend sticking to something like simple adapter boards at most.

        • megopie@beehaw.orgOP
          3·
          10 个月前

          See, I knew about PCB way and was wondering if their products would even really work. Or if the sockets for the chips would be available for small batch stuff.

          • Doombot1@lemmy.one
            5·
            10 个月前

            Even if you were able to make your own PCB and somehow solder everything onto it, one of the things that makes complex boards like motherboards so tough to make is signal path lengths. Ever see how some of the traces on motherboards are squiggly and take up more space than the straight ones? That isn’t just for fun - all of the traces have to be incredibly specific lengths for a whole number of reasons, including signal timing and interference with other traces.

          • jarfil@beehaw.org
            3·
            10 个月前

            “Sockets for the chips” are the least of the problems, most chips don’t use sockets at all, they instead get soldered to a board through BGAs. Even multi-chip boards like CPUs, usually get soldered through BGAs. Then, what you need to think about is what kind of boards you want to connect and how.

            If you wanted to make something low spec, you might look at the Raspberry Pi Compute Module, that only needs a sort of “breakout board”, where you could place a bunch of M.2 connectors for daughter boards… but chances are you will be really hard pressed to make a whole laptop that’s cheaper than a much higher spec brand one.

      • flatbield@beehaw.orgEnglish
        6·
        10 个月前

        You could order from the same supply chains that Brands do but the up front costs and lot size requirements would be too much for anyone other than a major brand. Plus it would have to be worth their time and not upset their other customers. Big barrier to entry. I do not doubt it could be done, but at a very high unit cost.